GKL, walk together with you!
Execellent
Creatives
Shenzhen GK Lighting Co.,Ltd.
LED modules and LED strips lighting expert
Hotline 0755-27602700
GKL Products
LJW068A1 diffuse reflection 12 lamp/m roller shutter straight lamp
-
- Commodity ID: LJW068A1
Classification:
SIGNBETTER
key word:
- Details
-
1. Product description:
1. Adopt high-quality 3030 light source, which has the characteristics of high brightness, uniform light color, and strong antistatic ability;
2. DC12V power supply, single lamp can be cut, PCB is made of aluminum substrate, and the heat dissipation effect is good;
3. Equipped with large-angle TV optics Lens, beautiful appearance;
4. The straight strip light adopts the rolling shutter buckle structure design, easy to install, and the waterproof level is IP33;Application places: suitable for 5-15cm advertising light boxes, ultra-thin light boxes for mobile phone flagship chain stores, dark grooves in entertainment venues, etc.
2. Photoelectric parameters:
Operating Voltage:
DC12V
PCB size:
960*17.5*1.2mm
Working current:
1200mA
Wire:
AWG18
power:
14.4W
weight:
11g/PCS
Beam angle:
170°
Standard cascading:
10PCS
Luminous flux:
1150lm/pcs
Drive mode:
constant pressure
Number of LEDs:
12PCS
Operating temperature:
-25~55℃
Color temperature:
9000-11000K
Storage temperature:
-25~70℃
Light effect:
80lm/w
Protection class:
IP33
Dimensions:
960 x 17.5 x 7.5mm
Warranty period:
2 years
3. Light source parameters:
LED type
3030
LED light angle
120°
service life
＞30000H
Significant
>70
LED color temperature
9000-11000K
4. Product Dimensions: (unit: mm):
5. Schematic diagram of product installation and wiring:
6. Matters needing attention in product installation and use:
(1). This product is a non-waterproof straight strip light, which is forbidden to be used outdoors. The working voltage of the straight strip light is DC12V, and a single light can be cut
; The main power line of the power supply) to avoid the power line being too small, which will cause the power line to overheat and cause adverse consequences; the length of the power line of the switching power supply and the straight light should not exceed 2 meters, otherwise the line loss will increase and the total power will increase;
(3) .When installing, first adjust the PCB board according to the required spacing of the light box, and then use 4 ST2.5x6mm screws to fix the plastic buckle;
(4). Take the scheme in the connection diagram: the maximum cascading 10PCS is a unit, and each unit Perform a power supply to avoid damage to the product due to excessive current;
(5). Do not touch with electricity, and work with electricity. It is recommended to use a switching power supply that has passed relevant safety certification (with short-circuit protection, over-voltage protection, and over-current protection).
Note: It is recommended to use a switching power supply (with short-circuit protection, over-voltage protection, and over-current protection) that has passed the relevant safety certification.
Contact Us
-
Add:5F,Block F,Guancheng Low-carbon Park,
Hedi Road,Gongming Town,ShenZhen,China, 518106
Service Hotline：400-6698-611
Tel：+86-755-2760-2700 extension 806
Fax：+86 755-2344-2800
Website：www.gklighting.com
Shenzhen GK Lighting Wechat QR code
Powered by www.300.cn