GKL, walk together with you!
Execellent
Creatives
Shenzhen GK Lighting Co.,Ltd.
LED modules and LED strips lighting expert
Hotline 0755-27602700
GKL Products
MDW155D, 1 lamp 2.2W 3535 with optical 160 ° injection module
-
- Commodity ID: MDW155D
Classification:
LED High-power Module
key word:
- Details
-
1. Product description:
1. It adopts flip-chip eutectic 3535 light source, which has the characteristics of high brightness, uniform light color and strong antistatic ability;
2. It adopts DC12V power supply, constant current circuit driving mode, and single lamp can be cut;
3. Equipped with 160° optical lens, The appearance is beautiful, the PCB adopts high-conductivity aluminum substrate, and the heat dissipation effect is good;
4. The module adopts the ABS half-pack injection molding process, the flame retardant grade is UL94V-2, and the protection grade is IP65. ;Application places: mainly used in 12-25cm light box signboards, single-sided advertising light boxes, etc.
2. Product parameters:
Operating Voltage:
DC12V
Exterior color:
White
power:
2.2W
Weight (20PCS):
330g
Luminous flux:
160lm
Standard cascade (Typ):
20PCS
Light effect:
73lm/W
a fixed way:
Glass glue or screw ST2.9x10mm
Beam angle:
160°
Adhesive:
White release paper blue 3M lettering adhesive
Number of LEDs:
1PCS
Operating temperature:
-40~60℃
Protection class:
IP65
Storage temperature:
-40~80℃
physical dimension:
62*34*7.3mm
Warranty period:
5 years/30000 hours
3. Product light source parameters:
LED type
SMD3535
LED optional color temperature/wavelength
6300-7000K
7000-8000K
Significant
>70
LED luminous flux/brightness
245-274lm
245-274lm
4. Spot diagram and light distribution curve diagram:
5. Schematic diagram of product dimensions (unit: mm):
6. Schematic diagram of product installation and wiring:
7. Product application:
Diwali scheme
Light box thickness mm
Light box size mm
Lighting line spacing mm
Lighting column spacing mm
Actual dosage PCS
Installation density PCS/m²
Surface illuminance
LUX/m²
Recommended plan
150
1000x1000
200
200
25
25
1800-2100
Option one
180
2000x1000
180
200
56
28
1800-2300
Option Two
200
1500x1200
180
200
50
28
1700-2100
Option three
250
1200x1000
180
180
37
31
2000-2300
Note: The above row light data is for reference only. The thickness of the test panel is 3mm milky white acrylic board, and the light transmittance is about 54.4%.
8. Matters needing attention in product installation and use:
(1). Use 2x1.5mm² or more cables for the main power line (choose the corresponding main power line according to the load current). If the module power line needs to be lengthened, you must use a wire with a specification above 0.75mm²/18# to avoid overloading and overheating the power line.
(2). The single lamp of the module can be cut. When the module is cut short and connected, first use diagonal pliers to cut the power cord between the two modules in the middle, peel off the outer skin about 10mm, and put the corresponding color ( The white and red strips are the positive pole, and the white and blue strips are the negative pole) the wires are twisted into one strand, and then insulated and waterproofed with a special waterproof tape. It is advisable to pull out;
(3). When installing the module, first tear off the release paper at the bottom of the module, stick it to the light box or the advertising logo for preliminary fixation, and then use 2 ST2.9x10mm self-tapping screws to lock and reinforce , and can also be fixed by applying glass glue on both sides of the module;
(4). The terminal module wires need to be waterproofed with waterproof tape or wiring waterproof plugs to avoid short-circuit damage to the product;
(5). Module standard level Connect 20PCS, use DC12V single-end power supply; maximum cascade 40PCS, use both ends of power supply, do not overconnect, to avoid excessive line load current and damage the product;
(6). Live touch, live work.Note: It is recommended to use a switching power supply (with short-circuit protection, over-voltage protection, and over-current protection) that has passed the relevant safety certification.
Contact Us
-
Add:5F,Block F,Guancheng Low-carbon Park,
Hedi Road,Gongming Town,ShenZhen,China, 518106
Service Hotline：400-6698-611
Tel：+86-755-2760-2700 extension 806
Fax：+86 755-2344-2800
Website：www.gklighting.com
Shenzhen GK Lighting Wechat QR code
Powered by www.300.cn