GKL, walk together with you!
Execellent
Creatives
Shenzhen GK Lighting Co.,Ltd.
LED modules and LED strips lighting expert
Hotline 0755-27602700
GKL Products
MPW191D-43 * 36 single lamp 5252 high-power backlit injection mold DC12V
-
- Commodity ID: MPW191D
Classification:
LED High-power Module
key word:
- Details
-
Product parameters:
Operating Voltage:
DC 12V constant current drive
shell material:
Aluminum substrate + optical lens + ABS injection molding
Input Current:
100mA
shell color;
beige/beige
circuit:
Single lamp constant current drive, can be cut arbitrarily
Connecting wire material:
18AWG,150mm PVC single wire
power:
1.5W
Connecting wire color:
Red line is positive, white line is negative
Beam angle:
170°
Number of cascades:
30
Single lamp brightness:
100 lm
Fixing screw:
M3
physical dimension:
43*36*7.2 mm
Adhesive:
3M Thermal Adhesive
Number of LEDs:
1 piece
Operating temperature:
-40~60℃
Luminous color:
White
Storage temperature:
-40~80℃
Protection class:
IP65
Warranty years:
2 years
Waterproof method:
Integrated optical lens + ABS injection molding
Product light source parameters:
LED type
1W 5050 high power light source
Beam angle
170°
service life
>50000H
can choose colour
white light
Forward Voltage
White light: 3.0-3.4V
LED color temperature
warm white light
positive white light
cold white light
2700-3500K
6000-7000K
7000-9000K
LED brightness
warm white light
positive white light
cold white light
100-110LM
100-110LM
90-100LM
Product light source parameters:
Product installation wiring diagram:
Matters needing attention in product installation and use:
(A). This product uses 12V constant current power supply. A single lamp bead can be cut arbitrarily without affecting the use. The maximum cascade connection is 30PCS. Continued increase in cascade connection will affect the constant current effect;
(B). Use 12V DC constant voltage switch The power supply drives this product, choose a power supply with appropriate power according to the number of connected modules; do not connect this product directly to 220V mains, otherwise the product will be burned.
(C). When installing wiring, connect the red wire of the module to the positive output port of the power supply. The white wire in the middle is an empty wire, which can be cut off directly and not connected. The white wire on the side of the module is connected to the negative output port of the power supply;
(D). The total power of the series-connected modules shall not exceed 80% of the rated power of the drive power supply, otherwise the power supply may be easily burned. In addition, according to the actual number of modules connected in series, select the appropriate thickness of the main line connection line, and the connection between the lines The points must be tightly wrapped with insulating electrical glue to ensure the safe use of this product!
Contact Us
-
Add:5F,Block F,Guancheng Low-carbon Park,
Hedi Road,Gongming Town,ShenZhen,China, 518106
Service Hotline：400-6698-611
Tel：+86-755-2760-2700 extension 806
Fax：+86 755-2344-2800
Website：www.gklighting.com
Shenzhen GK Lighting Wechat QR code
Powered by www.300.cn