GKL, walk together with you!
Execellent
Creatives
Shenzhen GK Lighting Co.,Ltd.
LED modules and LED strips lighting expert
Hotline 0755-27602700
GKL Products
MFW149A1 four lamp square 1.32W 2835 constant pressure injection molding module with lens
-
- Commodity ID: MFW149A1
Classification:
LED 2835 Module
key word:
- Details
-
1. Product description:
1. It adopts high-quality 2835 light source, which has the characteristics of high brightness, uniform light color, and strong antistatic ability;
2. It adopts DC12V power supply and constant voltage circuit driving mode;
3. Equipped with optical lens, the appearance is beautiful, and the PCB is made of high-conductivity aluminum Substrate, good heat dissipation effect;
4. The module is made of fireproof material, the fireproof level can reach U94V-2, and the protection level is IP652. Product parameters:
Operating Voltage:
DC12V
Exterior color;
White ABS
power:
1.32W
Connecting wire material:
UL1007 18# double parallel
Luminous flux:
85 Lm
Weight (20PCS):
222g
Light effect:
65lm/w
Number of cascades:
20Pcs
Beam angle:
160°
Fixing screw:
ST2.5x10mm
physical dimension:
46*36.5*7mm
Adhesive:
3M white adhesive
Number of LEDs:
4LED
Operating temperature:
-40~60℃
Protection class:
IP65
Storage temperature:
-40~80℃
Warranty period:
3 years
3. Product light source parameters:
LED type
SMD2835
service life
＞30000H
Significant
>70
LED color temperature/wavelength
Warm White
Natural White
True white
Cold white
2800-3300K
3800-4500K
5500-6500K
7000-15000K
LED luminous flux/brightness
20-22lm
20-22lm
20-22lm
20-22lm
4. Schematic diagram of product dimensions (unit: mm):
5. Schematic diagram of product installation and wiring:
6. Matters needing attention in product installation and use:
(1). Use 2x1.5mm² or more cables for the main power line (choose the corresponding main power line according to the load current). If the module power line needs to be extended, you must use a wire with a specification of 0.75mm²/18# or above to avoid overloading and overheating the power line.
(2). The single lamp of the module can be cut. When the module is cut short and connected, first use diagonal pliers to cut the power cord between the two modules in the center, peel off the outer skin about 10mm, and put the corresponding color ( The positive pole of the red and white line, and the negative pole of the white line) are twisted into one strand, and then insulated and waterproofed with a special waterproof tape. Finally, the continuity and reliability of the power terminal are checked. It is advisable that the wire cannot be pulled out from the terminal with bare hands. ;
(3). When installing the module, first tear off the adhesive release paper at the bottom of the module, stick it to the light box or the advertising logo for preliminary fixation, and then use a ST2.5x10mm self-tapping screw to lock and reinforce it. The two sides of the module are fixed by glass glue;
(4). When the end of the module is not connected in series, it is necessary to use waterproof tape or waterproof plug for waterproof treatment to avoid short circuit damage to the product;
(5). The end of the mold The wiring head needs to be waterproofed with waterproof tape or wiring waterproof plug to avoid damage to the product caused by short circuit;
(6). The module cannot be completely exposed for outdoor use.
Note: It is recommended to use a switching power supply (with short-circuit protection, over-voltage protection, and over-current protection) that has passed the relevant safety certification.
Contact Us
-
Add:5F,Block F,Guancheng Low-carbon Park,
Hedi Road,Gongming Town,ShenZhen,China, 518106
Service Hotline：400-6698-611
Tel：+86-755-2760-2700 extension 806
Fax：+86 755-2344-2800
Website：www.gklighting.com
Shenzhen GK Lighting Wechat QR code
Powered by www.300.cn